422 research outputs found

    Characterization of three types of silicon solar cells for SEPS Deep Space Mission. Volume 3: Current-voltage characteristics of spectrolab sculptured BSR/P+ (K7), BSR/P+ (K6.5) and BSR (K4.5) cells as a function of temperature and intensity

    Get PDF
    Three types of high performance silicon solar cells, sculptured BSR/P+(K7), BSR/P+(K6.5) and BSR(K4.5) manufactured by Spectrolab were evaluated for their low temperature and low intensity performance. Sixteen cells of each type were subjected to 11 temperatures and 9 intensities. The sculptured BSR/P+(K7) cells provided the greatest maximum power output both at 1 AU and at LTLI conditions. The average efficiencies of this cell were 14.4 percent at 1 SC/+25 deg C and 18.5 percent at 0.086 SC/-100 deg C

    A reconsideration of disk properties in Herbig Ae stars

    Get PDF
    This paper presents state-of-the-art spectral energy distributions (SEDs) of four Herbig Ae stars, based in part on new data in the mid and far-infrared and at millimeter wavelengths. The SEDs are discussed in the context of circumstellar disk models. We show that models of irradiated disks provide a good fit to the observations over the whole range of wavelengths. We offer a possible solution to the long-standing puzzle caused by the excess emission of Herbig Ae stars, where a large fraction of the stellar luminosity is re-radiated between ~1.25 and 7 μm, with a peak at about 3 μm. We suggest that this general behaviour can be caused by dust evaporation in disks where the gas component is optically thin to the stellar radiation, as expected if the accretion rate is very low. The creation of a puffed-up inner wall of optically thick dust at the dust sublimation radius can account for the near-infrared characteristics of the SEDs. It can also naturally explain the H and K band interferometric observations of AB Aur (Millan-Gabet et al. [CITE]), which reveal a ring of emission of radius ~0.3 AU. Finally, irradiated disk models can easily explain the observed intensity of the 10 μm silicate features and their variation from star to star

    Water absorption and desorption in shuttle ablator and insulation materials

    Get PDF
    Shuttle systems ablator and insulation materials underwent water soak with subsequent water desorption in vacuum. Water accumulation in these materials after a soak for 24 hours ranged from +1.1% for orbiter tile to +161% for solid rocket booster MSA-1. After 1 minute in vacuum, water retention ranged from none in the orbiter tile to +70% for solid rocket booster cork

    A reconsideration of disk properties in Herbig Ae stars

    Get PDF
    This paper presents state-of-the-art spectral energy distributions (SEDs) of four Herbig Ae stars, based in part on new data in the mid and far-infrared and at millimeter wavelengths. The SEDs are discussed in the context of circumstellar disk models. We show that models of irradiated disks provide a good fit to the observations over the whole range of wavelengths. We offer a possible solution to the long-standing puzzle caused by the excess emission of Herbig Ae stars, where a large fraction of the stellar luminosity is re-radiated between ~1.25 and 7 μm, with a peak at about 3 μm. We suggest that this general behaviour can be caused by dust evaporation in disks where the gas component is optically thin to the stellar radiation, as expected if the accretion rate is very low. The creation of a puffed-up inner wall of optically thick dust at the dust sublimation radius can account for the near-infrared characteristics of the SEDs. It can also naturally explain the H and K band interferometric observations of AB Aur (Millan-Gabet et al. [CITE]), which reveal a ring of emission of radius ~0.3 AU. Finally, irradiated disk models can easily explain the observed intensity of the 10 μm silicate features and their variation from star to star

    Optical and infrared observations of the Type IIP SN2002hh from day 3 to 397

    Full text link
    We present optical and infrared (IR) observations of the type IIP SN2002hh from 3 to 397 days after explosion. The optical spectroscopic (4-397d) and photometric (3-278d) data are complemented by spectroscopic (137-381d) and photometric (137-314d) data acquired at IR wavelengths. This is the first time L-band spectra have ever been successfully obtained for a supernova at a distance beyond the Local Group. The VRI light curves in the first 40 days reveal SN2002hh to be a SN IIP (plateau) - the most common of all core-collapse supernovae. SN2002hh is one of the most highly extinguished supernovae ever investigated. To provide a good match between its early-time spectrum and a coeval spectrum of the Type IIP SN1999em, as well as maintaining consistency with KI interstellar absorption, we invoke a 2-component extinction model. One component is due to the combined effect of the interstellar medium of our Milky Way Galaxy and the SN host galaxy, while the other component is due to a "dust pocket" where the grains have a mean size smaller than in the interstellar medium. The early-time optical light curves of SNe 1999em and 2002hh are generally well-matched, as are the radioactive tails of these two SNe and SN1987A. The late-time similarity of the SN2002hh optical light curves to those of SN1987A, together with measurements of the optical/IR luminosity and [FeII] 1.257mu emission indicate that 0.07 +- 0.02 Msun of Ni 56 was ejected by SN2002hh. [... ABRIDGED...] From the [OI] 6300,6364 A doublet luminosity we infer a 16-18 Msun main-sequence progenitor star. The progenitor of SN2002hh was probably a red supergiant with a substantial, dusty wind.Comment: 32 pages, 30 figures, accepted for publication in MNRA

    Reliability of Rapid Diagnostic Tests in Diagnosing Pregnancy-Associated Malaria in North-Eastern Tanzania.

    Get PDF
    Accurate diagnosis and prompt treatment of pregnancy-associated malaria (PAM) are key aspects in averting adverse pregnancy outcomes. Microscopy is the gold standard in malaria diagnosis, but it has limited detection and availability. When used appropriately, rapid diagnostic tests (RDTs) could be an ideal diagnostic complement to microscopy, due to their ease of use and adequate sensitivity in detecting even sub-microscopic infections. Polymerase chain reaction (PCR) is even more sensitive, but it is mainly used for research purposes. The accuracy and reliability of RDTs in diagnosing PAM was evaluated using microscopy and PCR. A cohort of pregnant women in north-eastern Tanzania was followed throughout pregnancy for detection of plasmodial infection using venous and placental blood samples evaluated by histidine rich protein 2 (HRP-2) and parasite lactate dehydrogenase (pLDH) based RDTs (Parascreen™) or HRP-2 only (Paracheck Pf® and ParaHIT®f), microscopy and nested Plasmodium species diagnostic PCR. From a cohort of 924 pregnant women who completed the follow up, complete RDT and microscopy data was available for 5,555 blood samples and of these 442 samples were analysed by PCR. Of the 5,555 blood samples, 49 ((proportion and 95% confidence interval) 0.9% [0.7 -1.1]) samples were positive by microscopy and 91 (1.6% [1.3-2.0]) by RDT. Forty-six (50.5% [40.5 - 60.6]) and 45 (49.5% [39.4 - 59.5]) of the RDT positive samples were positive and negative by microscopy, respectively, whereas nineteen (42.2% [29.0 - 56.7]) of the microscopy negative, but RDT positive, samples were positive by PCR. Three (0.05% [0.02 - 0.2]) samples were positive by microscopy but negative by RDT. 351 of the 5,461 samples negative by both RDT and microscopy were tested by PCR and found negative. There was no statistically significant difference between the performances of the different RDTs. Microscopy underestimated the real burden of malaria during pregnancy and RDTs performed better than microscopy in diagnosing PAM. In areas where intermittent preventive treatment during pregnancy may be abandoned due to low and decreasing malaria risk and instead replaced with active case management, screening with RDT is likely to identify most infections in pregnant women and out-performs microscopy as a diagnostic tool

    Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

    Get PDF
    The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

    Measurement of the flavour composition of dijet events in pp collisions at root s=7 TeV with the ATLAS detector

    Get PDF
    This paper describes a measurement of the flavour composition of dijet events produced in pp collisions at √s=7 TeV using the ATLAS detector. The measurement uses the full 2010 data sample, corresponding to an integrated luminosity of 39 pb−1. Six possible combinations of light, charm and bottom jets are identified in the dijet events, where the jet flavour is defined by the presence of bottom, charm or solely light flavour hadrons in the jet. Kinematic variables, based on the properties of displaced decay vertices and optimised for jet flavour identification, are used in a multidimensional template fit to measure the fractions of these dijet flavour states as functions of the leading jet transverse momentum in the range 40 GeV to 500 GeV and jet rapidity |y|<2.1. The fit results agree with the predictions of leading- and next-to-leading-order calculations, with the exception of the dijet fraction composed of bottom and light flavour jets, which is underestimated by all models at large transverse jet momenta. The ability to identify jets containing two b-hadrons, originating from e.g. gluon splitting, is demonstrated. The difference between bottom jet production rates in leading and subleading jets is consistent with the next-to-leading-order predictions

    Search for high-mass resonances decaying to dilepton final states in pp collisions at s√=7 TeV with the ATLAS detector

    Get PDF
    The ATLAS detector at the Large Hadron Collider is used to search for high-mass resonances decaying to an electron-positron pair or a muon-antimuon pair. The search is sensitive to heavy neutral Z′ gauge bosons, Randall-Sundrum gravitons, Z * bosons, techni-mesons, Kaluza-Klein Z/γ bosons, and bosons predicted by Torsion models. Results are presented based on an analysis of pp collisions at a center-of-mass energy of 7 TeV corresponding to an integrated luminosity of 4.9 fb−1 in the e + e − channel and 5.0 fb−1 in the μ + μ −channel. A Z ′ boson with Standard Model-like couplings is excluded at 95 % confidence level for masses below 2.22 TeV. A Randall-Sundrum graviton with coupling k/MPl=0.1 is excluded at 95 % confidence level for masses below 2.16 TeV. Limits on the other models are also presented, including Technicolor and Minimal Z′ Models
    corecore